|
| |
|
| |
| EP-Splice-P Splice Closure |
Full View |
EP-Splice-P in full view Dome EP-Splice-P is a vertical type. Hoop
is used to fix and seal FOSC cover and base, and its installation is
quite simple. EP-Splice-P is provided with 4 fiber cable entry/exit
tubes, and sealing is achieved by tightening nut after inserting fiber
cable. The FOSC is suitable for protecting fiber cable splices in
straight-through and branching applications. It can be placed in
aerial, underground, wall-mounting, handhole-mounting and ductmounting
applications. Based on an advanced formula, the plastic
parts are made of injection-molded, high-strength engineering plastic
PC by numerical control equipment, therefore effectively prevent
products from aging caused by coldness, heat, oxygen and ultraviolet
radiation. The strong housing and main components provide fire
resistant, waterproof, and quakeproof while protecting splices during
pulling, torsioning and impacting. It ensures long-term reliability and
usage under ambient temperature from -40ēC to +65ēC. |
Cutaway View |
The EP-Splice-P has the following outstanding features.
- Advanced internal structure design, fiber suffers no attenuation.
- The closure is spacious enough for winding and storing fibers
- Fiber Optic Splice Trays (FOSTs) are designed in SLIDE-IN-LOCK
and its opening angle is above 90°
- The curved diameter meets with international standard.
- Easy and fast to increase and reduce FOSTs.
- Innovative elastic integrated seal fitting
- Straight-through and reserved fibers with protective coat can
be winded into fiber holding tray easily and neatly.
|
Integrated Seal Fitting, Hoop |
EP-Splice-P consists of one set of elastic integrated seal fitting.
It is installed between FOSC housing and the hoop and nut. Under
ambient temperature from -40ēC to +65ēC, it can be shrinking and
dilating to ensure long-term sealing performance of FOSC.
Sealing is achieved by locking the hoop and tightening nut,
therefore easy for installation.
|
Tray 001, Tray 002 |
- The capacity of bunchy FOST 009 is from 6 to 12 cores;
- The capacity of bunchy FOST 010 is from 12 to 24 cores;
Quantity of bunchy FOSTs and heat shrinkable protective
sleeves are to be determined according to the total capacity of
the FOSC.zzz
Ribbon FOST 012 can accommodate 6 pieces of ribbon heat
shrinkable protective sleeves.
|
|
|
[Back]
|
|
|
|
|
